Filter
Top Products
35
Getting Connected and Installing Drivers (Macintosh)
fig.3-8_35
6
Choose
“Open”
from the
File
menu.
From the
OMS Setting
folder that
you copied in
step 3
, select the
PCR-
1
file, and click
[Open]
.
A screen like the one shown here
will appear.
fig.3-9_35
7
From the
Edit
menu, select
OMS
MIDI Setup
.
In the
OMS MIDI Setup
dialog box
that appears, check
Run MIDI in
background
, and click
[OK]
.
fig.3-10_40
8
From the
File
menu, choose
Make
Current
.
* If you are unable to select
Make
Current
, it has already been applied,
and you may continue to the next step.
9
Verify that MIDI transmission and
reception can be performed correctly. From the
Studio
menu, choose
Test
Studio
.
fig.OMS3
10
Try moving the fader of the PCR-1.
If the arrow beside number
1
or
2
in
the diagram at right blinks, the
settings have been made correctly.
A diamond mark (◊) indicate in the settings are enabled.
For details on the PCR-1’s
input/output devices,
refer to Input / output
devices (p. 44).
PCR-1_e1.book 35 ページ ２００３年１１月２０日 木曜日 午後３時２２分