Filter
Top Products
69
Use MIDI functionality
Advanced mode 1
Advanced mode 1 of CONTROL CHANGE ASSIGN lets you specify the upper and lower limits
of the control change value in addition to the items of Basic mode.
1.
Press the
[EDIT]
button.
2.
Slightly move the controller to which you want to assign a Control Change message. In
the case of a button, press that button.
The display will indicate the number of the selected controller.
3.
Confirm what’s indicated, and press the
[ENTER]
button.
4.
Using the
ASSIGNABLE FUNCTION
keys ( ) on the keyboard, get "CC0" to appear
in the display, then press the
[1]
key of the keyboard.
The display will indicate “CC1”.
5.
Press the
[ENTER]
button.
6.
Input the channel.
7.
Press the
[ENTER]
button.
8.
Input the control change number.
9.
Press the
[ENTER]
button.
fig.p
10.
Specify the range of values. (
➝
Specifying the range of values (upper and
lower limits)
(p. 67))
The display will indicate “P–”.
11.
Specify the output port. (
➝
Specifying the port
(p. 62))
12.
If you are making an assignment for a button, specify the button mode.
(
➝
Specifying the button mode
(p. 62))
*1 Reference
*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode
of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value,
or will blink if the value is different.
PCR-1_e1.book 69 ページ ２００３年１１月２０日 木曜日 午後３時２２分