Filter
Top Products
72
Use MIDI functionality
Advance mode 1, 2
Advanced mode 1 of PROGRAM CHANGE ASSIGN lets you specify the upper and lower
limits of the program change value. Advanced mode 2 lets you transmit BANK LSB/MSB
settings in addition to the program change.
1.
Press the
[EDIT]
button.
2.
Slightly move the controller to which you want to assign a Program Change message. In
the case of a button, press that button. The display will indicate the number of the selected
controller.
3.
Confirm what’s indicated, and press the
[ENTER]
button.
Advanced mode 1
—Specifying the range of values
4.
Using the
ASSIGNABLE FUNCTION
keys ( ) on the keyboard, get "PC0" to appear
in the display, then press the
[1]
key of the keyboard.
5.
Press the
[ENTER]
button.
6.
Input the channel.
7.
Press the
[ENTER]
button.
8.
Specify the range of values. (
➝
Specifying the range of values (upper and lower limits)
(p. 67))
Advanced mode 2
—Transmitting bank data
4.
Using the
ASSIGNABLE FUNCTION
keys ( ) on the keyboard, get "PC0" to appear
in the display, then press the
[2]
key of the keyboard.
5.
Press the
[ENTER]
button.
6.
Input the channel.
7.
Press the
[ENTER]
button.
fig.bank-2
8.
Specify the bank select MSB (CC#00). Use the
[DEC] [INC]
buttons or the
[0]
–
[F]
keys to specify the MSB.
9.
Press the
[ENTER]
button.
fig.BANK-3
10.
Specify the bank select LSB (CC#32). Use the
[DEC] [INC]
buttons or the
[0]
–
[F]
keys to specify the LSB.
11.
Press the
[ENTER]
button.
12.
Input the program change number.
fig.p
13.
Press the
[ENTER]
button.
The display will indicate “P–”.
14.
Specify the output port. (
➝
Specifying the port
(p. 62))
*1 Reference
*1 Reference
*1 Reference
*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode
of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value,
or will blink if the value is different.
PCR-1_e1.book 72 ページ ２００３年１１月２０日 木曜日 午後３時２２分