Filter
Top Products
49
Use audio functionality
Digitally recording sound from your computer
fig.digital.e
Connections
Use an optical digital cable to connect your recording device to the
Digital output jack
.
* Signals input through the PCR-1's input jacks cannot be directly output from the digital output jack.
The digital output jack always outputs only the audio signal that is being sent from the computer.
Setting the Sampling frequency
Set your audio playback software, the PCR-1, and your digital recording device (e.g., MD or
DAT) to the same
sampling frequency
(p. 96).
Whenever you’ve changed the sampling frequency, you must exit any applications you are
using, disconnect the USB cable from the PCR-1, then connect it again.
* The PCR-1 does not support professional digital audio formats.
Don’t connect anything to input jacks you are not using.