Filter
Top Products
56
Use MIDI functionality
Program Change Mode (
PROGRAM CHANGE)
This mode lets you transmit a program change message on the
current channel
(p. 53).
fig.PC-1_90
fig.program
1
Press the
[SHIFT]
button so it is lit.
2
Press the
[PGM CHANGE]
button.
The
[PGM CHANGE]
button will light. The display will indicate the
program change that was transmitted most recently.
* The
[HEX]
or
[DECIMAL]
button will also light according to the input mode (p. 54).
1Use the
[DEC] [INC]
buttons or the
[0]
–
[F]
keys of the keyboard to specify the program
change you want to transmit.
3
Press the
[ENTER]
button.
The
program change
has now been transmitted.
The setting will be cancelled if you press another button instead of the
[ENTER]
button.
DEC
Change the current value by -1
INC
Change the current value by +1
00–0F
The input value
HEX
...00–7F
DECIMAL
...1–128