Filter
Top Products
E-200/E-100
15
(4) Use FAMILY [√][®] or the STYLE buttons to select the mem-
ory area that contains the desired Music Style.
The FAMILY buttons allow you to jump to the desired “fam-
ily” (which also include the Flash and USER STL areas).
The display now shows the name of the selected family.
(5) Use the STYLE buttons to select an internal (or the DISK)
family:
If you use these buttons, the family name is not displayed.
Instead, you will see the name of the first Style within the
selected family. Here is an example: if you press the BALLAD
button, the display will show “020 PianoBall”.
Note: On the E-100, the [DISK] button is called [USER¥STL]. It
allows you to select the family of the same name.
(6) Use SELECT [√][®] to specify the desired Style within the
selected group.
The first press of SELECT [®] (or [√]) shows the name of the
first Music Style within the selected group. It is already
selected, so if you need the first Style, there is actually no
need to press SELECT [®]. You must use SELECT [√] or [®],
however, to select another Style within the same group.
You can also use the numeric buttons to select Styles. To do
so, first “double-click” (press twice) the [STYLE] button (it
starts to flash), then enter the number. (Press another button
in the DATA ENTRY section to leave this “numeric selection
state”.) See also “Working with the FAMILY and SELECT but-
tons” (p. 17).
After selecting memory 101 (Flash) or 201 (first disk memory
[E-200 only]
), the display shows a flashing Yes message.
Note: If you select a Style while the Arranger is stopped, the
E-200/E-100 automatically activates the OT1 memory.
Note: If you forgot to insert a floppy disk into the drive, the dis-
play shows “No Disk” when you attempt to select the “disk
family”.
(7) If necessary, confirm your selection by pressing the [+/YES]
button.
The display briefly shows “LOADING” (only after selecting
a Style from the inserted floppy disk).
[E-200 only]
If you selected a Music Style on floppy disk, the
icon now flashes, and the E-200 automatically selects
the USER STL memory that now contains the Music
Style you loaded from floppy disk.
If you press [+/YES] during Arranger playback, the new Style
is used at the next downbeat (1st beat of the next measure).
Otherwise, the E-200/E-100 displays its name and uses that
Style when you press [START÷STOP].
Note:
[E-200 only]
See page 45 for how to save the Music Style in
the USER STL memory to the Flash memory.
Balance
The BALANCE [√][®] buttons allow you to change the volume
balance between the Arranger (or Song) parts and the Keyboard
parts (the ones you can play yourself).
(1) Press BALANCE [ACCOMP] if the Arranger (or Song parts)
are too soft.
(2) Press BALANCE [KEYBOARD] if you think your solo playing
should be louder.
By holding down [SPLIT] (or [DUAL]) while pressing these but-
tons, you can modify the volume of those Keyboard parts.
Note: See p. 38 for setting the volume of individual parts.
FAMILY
=
POP
73
=
FLASH
132
SELECT
BALANCE
ACCOMP KEYBOARD
=
Balance
80a10
E-200_US Page 15 Tuesday, January 27, 2004 4:01 PM