Filter
Top Products
E-200/E-100
9
Rear panel
A
OUTPUT R, L/MONO sockets
These sockets allow you to connect the E-200/E-100 to your
HiFi amplifier, a mixer, a cassette deck, a keyboard amplifier,
etc. If the external amplifier is mono, be sure to connect it to
the OUTPUT L/MONO socket.
PHONES 1/2 sockets
[E-100 only]
(Next to the OUTPUT sockets) This is where you can connect
two pairs of optional headphones (Roland RH-25 or RH-50).
By doing so, you switch off the E-100’s speakers.
B
DC IN socket
This is where you need to connect the supplied adapter
(PSB-4U for the E-200, ACO for the E-100). After connecting
the adapter cable, wind it around the cord hook to the
socket’s right to prevent accidental power failures.
Note:
Be sure to only use the adapter supplied with your E-200/
E-100. Other adapters may damage your Intelligent Keyboard.
C
FOOTSWITCH socket
This is where you can connect an optional DP-2, DP-6, or
BOSS FS-5U footswitch that allows you to hold (“sustain”)
the notes you play with your right hand. It can also be used
for controlling other parameters (see “FSW° (Footswitch
Assign)” (p. 38)).
D
MIDI OUT/IN sockets
Connect the MIDI OUT socket to the MIDI IN jack of your
computer (or MIDI instrument) to transfer MIDI data from
the E-200/E-100 to the computer or external MIDI instru-
ment. Connect the MIDI IN socket of the E-200/E-100 to the
computer’s MIDI OUT jack to receive data from the com-
puter.
E
USB port
The USB port can be used for archiving purposes with a com-
puter.
A B C D E F
E-200_US Page 9 Tuesday, January 27, 2004 4:01 PM