Filter
Top Products
r
E-200/E-100
52
Functions for educational purposes
The E-200/E-100 provides two functions that may come in
handy for music teachers or for those who use the E-200/E-100
in class:
Deactivating or activating the Demo function
The E-200/E-100’s Demo function can be switched off so that
pressing [USB]+[KEYBOARD¥TOUCH] will have no effect at all.
This may be useful in situations where the E-200/E-100 is used
in class. Here is how to deactivate the Demo function:
(1) Switch off the E-200/E-100.
(2) Hold down the [USB], [KEYBOARD¥TOUCH] and [ACOUSTIC]
buttons while switching the E-200/E-100 back on again.
The display briefly shows “DISABLED”.
This setting is remembered, so that next time you want to
listen to a demo song, you have to repeat the above proce-
dure.
Deactivating or activating the Arranger
Use the following procedure to ensure that the Arranger cannot
be started or stopped:
(1) Switch off the E-200/E-100.
(2) Hold down the [ACOUSTIC] and [ARRANGER] buttons while
you switch the E-200/E-100 back on again.
The display briefly shows “DISABLED”. It is now impossi-
ble to start/stop the Arranger using the [START÷STOP] but-
ton.
Repeat the above procedure when you want to use the
Arranger again.
Deactivating or activating the Arranger and Demo
functions
A third “educational” option is to switch off both the Demo and
the Arranger functions in one go:
(1) Switch off the E-200/E-100.
(2) Hold down the [ACOUSTIC] and [START÷STOP] buttons
while you switch the E-200/E-100 back on again.
The display briefly shows “DISABLED”. It is now impossi-
ble to start/stop the Arranger or demo song playback.
Repeat the above procedure when you want to use the
Arranger and Demo function again.
Initializing your E-200/E-100
(Factory)
After working extensively with your E-200/E-100, you may
want to recall the original factory settings. Note that the
Recorder song will be empty and that the User Programs
contain factory settings after initializing your E-200/E-100.
Here is how to initialize your E-200/E-100:
(1) Power off your E-200/E-100.
(2) Hold down the [USER¥PROGRAM/WRITE] button while
turning your E-200/E-100 back on again.
The message “Factory” informs you that the E-200/
E-100 has been initialized.
Note: This does not affect the data in the E-200/E-100’s Flash
memory. See page 40 for how to initialize that area.
16. Miscellaneous
E-200_US Page 52 Tuesday, January 27, 2004 4:01 PM