Filter
Top Products
E-200/E-100
35
●
Changing the amount of Chorus processing for
the Keyboard parts
To change the Chorus depth (i.e. how much Chorus is added
to a part), proceed as follows:
(6) If the [FUNCTION] button still lights, use SELECT [√][®] to
select one of the following parameters.
(If [FUNCTION] doesn’t light, first perform steps (1) and (2)
above.)
(7) Use [NO/–]/[YES/+] to select “0” if you don’t want the
selected Keyboard part to be processed by the Chorus
effect. Otherwise, set the desired value.
If you selected an MFX type (see p. 32), the Chr MAIN
parameter has no effect (even though it is displayed).
(8) Play a few notes on the keyboard to audition the effect.
Do not forget to activate the Split or Dual part if you wish to
audition its Chorus depth.
Note: This setting can be saved to a User Program (see p. 41).
(9) Press another “big” button in the DATA ENTRY section to
leave this function.
V-LINK function
V-LINK is a function that provides for the integration of music
and visual material. By using V-LINK-compatible video devices
(i.e. an Edirol DV-7PR), visual effects can be easily linked to, and
made part of the expressive elements of a performance.
By using the E-200/E-100 with an Edirol DV-7PR, you can:
• Use the E-200/E-100’s keyboard (highest octave) to switch
images (clips). Press and hold a key for longer transition
(“fade”). Briefly press a key for fast transitions.
• The numeric buttons [0]~[9] are used for switching palettes
(only if the [USER¥PROGRAM] button lights).
• Use the BENDER axis of the BENDER/MODULATION lever to
change the playback speed of the picture material or to
select a different color.
• Use the STYLIST buttons to change the effect (VFX1~4).
Note: V-Link signals can be transmitted via MIDI OUT.
(1) Connect the E-200/E-100’s MIDI OUT socket to the MIDI
IN socket of the external video processor (or to a UM-1
interface).
(2)
.Press the [V-LINK] button (it lights blue).
(3) Use the BENDER, the assigned buttons or “V-LINK” keys
(highest octave) to manipulate the video pictures in sync
with your music (see below).
(4) Press [V-LINK] again to switch off this function (the button
goes dark).
V-LINK functions that the E-200/E-100 can control
(and corresponding MIDI messages)
The E-200/E-100 provides the following functions for con-
trolling V-LINK compatible video equipment.
• Keyboard: Clip 1~8→ Program Change: 00H~08H
Press the keys in the highest octave to switch clips.
• Keyboard velocity: Dissolve Time→ CC23
The velocity of the keys in the highest octave controls the
speed of transition between images.
• [1]~[0] buttons (if the [USER¥PROGRAM] button lights): Pal-
ette 1~10→ CC00 (Bank Select)/00H~09H
While the [V-LINK] button lights, press buttons [1]~[0] to
switch palettes 1~10. (The numeric buttons also perform
their “normal” functions.)
• BENDER axis of the BENDER/MODULATION lever: Playback
Speed→ Pitch Bend
Moving the lever toward the right will speed up playback,
and moving it toward the left will slow down playback. At
the center position, playback speed will be normal.
• MODULATION axis of the BENDER/MODULATION lever: Clip
color→ CC24 (Color CB), CC25 (Color CR)
Press the lever towards the rear of the E-200/E-100 to
change the color. There are five steps that can be selected by
pressing the lever several times: green, violet, blue, red, orig-
inal clip color.
Chr MAIN
Chr DUAL
Chr SPLIT
Chorus depth of the Main part*.
Chorus depth of the Dual part.
Chorus depth of the Split part.
(*) Though this parameter is displayed even when MFX is set to something
else than “Off”, the Main part is not processed by the Chorus effect.
Main
Reverb
Chorus
Reverb
Chorus
MFX
“Off”
Main
MFX
When the MFX is set to “Off”
When the MFX is set to any other type
Edirol DV-7PR
Edirol UM-1
MIDI OUT
REMOTE
BEAT
E-200_US Page 35 Tuesday, January 27, 2004 4:01 PM