Filter
Top Products
E-200/E-100
25
You can also use an optional footswitch for starting and
stopping recording. Doing so has the advantage that you can
use both hands for playing (or the left hand for Pitch Bend/
Modulation effects and the right for playing the melody.)
• Connect an optional DP-2, DP-6, or BOSS FS-5U footswitch
to the FOOTSWITCH socket on the E-200/E-100’s rear panel.
• Press the [FUNCTION] button (it must light).
• Use FAMILY [√][®] to select “KB SET”.
The E-200/E-100’s Function parameters are divided into 9
logical “families”. For the following, we need to select the
group that contains the global keyboard settings.
• Use SELECT [√][®] to select the “FSW” parameter.
Note: See also “Working with the FAMILY and SELECT buttons”
(p. 17).
• Use the [NO/–]/[YES/+] buttons to select “Punch I/O”.
• Press [SONG] to return to the recording function.
• Continue with step (1) under “Punch I/O”.
In steps (5) and (7), press the footswitch (rather than the
[REC≈∏] button).
Using a footswitch for punching in/out
FUNCTION
SELECT
Sustain
E-200_US Page 25 Tuesday, January 27, 2004 4:01 PM