Filter
Top Products
E-200/E-100
51
If you like, you can also record your performance (or a Recorder songs) to cassette, MD, etc. To this end, you need to connect the E-200/E-100’s OUTPUT sockets to the external device’s REC IN
jacks.
Use a standard 1/4” phone cable for doing so. Another use for
these outputs is to connect the E-200/E-100 to your HiFi or key-
board amplifier (such as the Roland KC-550/350/150). Using a
HiFi amplifier requires the use of an adapter plug (phono/RCA→
1/4” jack). If you like, you can also purchase two Roland PJ-1M
cables.
Note: By connecting the OUTPUT jacks, you do not switch off the
E-200/E-100’s amplification system.
You can connect an optional DP-2, DP-6, or BOSS FS-5U foot
switch to the FOOTSWITCH jack in order to hold the notes even
after releasing the keys, or to perform other functions (see
p. 38).
15. Using the outputs and an optional footswitch
Cassette deck, power amplifier, HiFi amplifier, MA series
active speakers, etc.
DP-2, DP-6, or BOSS FS-5U footswitch
E-200_US Page 51 Tuesday, January 27, 2004 4:01 PM