Filter
Top Products
E-200/E-100
37
The E-200/E-100’s Function mode contains more advanced settings you may not need every day. They allow you to fine-tune your instrument’s response. It would therefore be a good idea to
familiarize yourself with these parameters. Most settings (“*”) can be written to a User Program (see p. 41). Other parameters (“°”) are saved to the Flash memory when you leave the Function
mode.
Editing parameters (general
procedure)
You can edit the E-200/E-100’s Function parameters via the dis-
play. Here is a general outline of the procedure for all parame-
ters discussed below:
(1) Press [FUNCTION].
(2) Use FAMILY [√][®] to select the Function group that con-
tains the desired parameter:
■ KB SET: KbdTouch, MsterTune, Transpos, TransMod, PB
Range, KeySplit, SpltHold, SpltInt, FSW
■ METRONOM: Mtro TS, MetroVol, Count-In
■ OCTAVE: MAIN Oct, DUAL Oct, SPLT Oct
■ VOLUME: Main Vol, Dual Vol, SplitVol, Auto Bass,
AccDrums, AccBass, Accomp
■ ARR SET: ArrChord, Arr Hold, IntMode, EP Chord, Bass Inv,
MI (Melody Intelligence)
■ EFFECTS: REV (Reverb), CHR (Chorus), MFX, Tone MFX, Rev
MAIN, Chr MAIN, Pan MAIN, Rev DUAL, Chr DUAL, Pan DUAL,
RevSPLIT, ChrSPLIT, PanSPLIT
■ KB SCALE: Scale C/C#/D/Eb/E/F/F#/G/Ab/A/Bb/B, Scale
Mode
■ MIDI: Local, MidiTxRx, Sync Rx, Style PC, LyricsTx,
NTARx14, PicthBnd, Modulatn, ProgChng, Velo Rx, Clock Tx,
StartStp, SongPosP
■ UTILITY: InitFLASH, Resume
■ WriteSNG (see p. 45)
■ WriteSTL (see p. 45)
■ RemoveSNG (see p. 46)
■ Remove STL (see p. 46)
(3) Use SELECT [√][®] to select the parameter you wish to edit
(see below).
Note: In FUNCTION mode, SELECT [√][®] do not allow you to
jump from one family to the next.
The “VALUE” message and a setting appear to signal that you
can change (“edit”) the selected parameter.
(4) Use the DATA ENTRY [NO/–]/[YES/+] buttons to modify the
setting of the selected parameter.
Note: See also “Working with the FAMILY and SELECT buttons”
(p. 17).
Note: To return to the default value of the currently selected
parameter, press [+] and [–] simultaneously.
(5) Use FAMILY [√][®] to select another Function parameter.
(6) Continue with step (3).
(7) Press another “big” button in the DATA ENTRY section to
leave this function.
KB SET parameters
■
Kbd Touch*
(1~127, Default setting: 110) Use this parameter to set the
E-200/E-100’s fixed velocity value that will be used when the
icon is not displayed. See p. 31.
Note: This parameter can also be selected by pressing and holding
[KEYBOARD¥TOUCH].
■
MstrTune° (Master Tune)
(427.4~452.6, Default setting: 440.0) This parameter allows you
to change the E-200/E-100’s overall tuning, which may be nec-
essary when you accompany a singer, an acoustic instrument,
or when you play to a recording on CD or cassette.
■
Transpos*
(–12~12, Default setting: 0) Use this parameter to transpose
the E-200/E-100 in semitones. If you’re not sure what transpo-
sition is, see p. 30. This parameter can also be selected by press-
ing the [TRANSPOSE] button.
■
TransMod*
(Default setting: Int+Song) This parameter allows you to spec-
ify which parts should be affected by the Transpose setting:
Int: The Keyboard and Arranger parts will be transposed. Notes
received via MIDI, however, will be played without change.
Song: Only the Song parts will be transposed. This is only
meaningful when you play back a Standard MIDI File or one of
your own songs with the E-200/E-100’s Recorder.
MIDI: Only the notes received via MIDI will be transposed.
Int+Sng, Int+MIDI, Sng+MIDI, All: These are combinations of
the above. Int could be useful to transpose only the Keyboard
parts so that you can play to a Recorder song in “your” key but
sound in the song’s key.
11. Function menu
FUNCTION
FAMILY
SELECT
KEY TOUCH
E-200_US Page 37 Tuesday, January 27, 2004 4:01 PM