Filter
Top Products
Internal Design of the CP5 & CP50
Reference
Left & Right Parts
[VOICE]
[PRE-AMP]
[MOD-FX]
[PWR-AMP] (CP5 only)
[LEFT1]/[LEFT2]/[RIGHT1]/
[RIGHT2] (CP5)
[LEFT]/[RIGHT] (CP50)
[COMMON]
Song Setting Area
[SONG SETTING]
[RECORD]
TRACK Part
[TRACK]
MIC INPUT Part
[MIC INPUT] (CP5 only)
Settings for All Parts
[REVERB]
Settings for All Performances
[MASTER COMPRESSOR]
[UTILITY]
[FILE]
Appendix
49 CP5/CP50 Reference Manual
File Area
Using the File area, you can perform a range of file management operations such as saving the
entire content of the stage piano’s User Memory on a USB flash-memory device and restoring data
previously saved on this type of device. The File screen contains two pages, and its functions are
described below.
Edit Sequence
Press the [FILE] button Navigate to the required page using the [ PAGE] and
[PAGE
] buttons Turn or press Knobs 1 to 3
Page
On-screen name
(and full name)
Description
1 Save This function is used to create files containing CP5 or CP50 data within the root
directory of the plugged-in USB flash-memory device. The Save screen can be
opened by pressing Knob 1. See page 50 for details regarding the content of this
screen.
Load This function is used to read files containing CP5 or CP50 data from the root direc-
tory of the plugged-in USB flash-memory device. The Load screen can be opened
by pressing Knob 2. See page 51 for details regarding the content of this screen.
NOTICE
Whenever data is loaded from a USB flash-memory device, all data at the specified
destination will be overwritten. It is wise, therefore, to regularly create backup
copies of important Performances on a USB flash-memory device or the like.
Rename This function is used to rename the All file on the plugged-in USB flash-memory
device. The Rename screen can be opened by pressing Knob 3. See page 53 for
details regarding the content of this screen.
2 Delete This function is used to delete the All file from the plugged-in USB flash-memory
device. The Delete screen can be opened by pressing Knob 1. See page 53 for
details regarding the content of this screen.
Format This function is used to format the plugged-in USB flash-memory device, initializing
the entire content of its memory. Press Knob 2 to perform a Format operation.
When asked to confirm that you wish to proceed, press Knob 1 (YES [PUSH]) or
the [ENTER] button to do so. Alternatively, if you do not wish to proceed, press
Knob 3 (NO [PUSH]) or the [EXIT] button to return to Page 2 of the File screen.
NOTICE
When a USB flash-memory device is formatted, all data saved on it will be
permanently erased. Before formatting a memory device, therefore, ensure that it
contains no irreplaceable data.
MemInfo
(Memory Info)
This function is used to confirm how much free space is available on the plugged-
in USB flash-memory device. When you press Knob 3, the following details will be
displayed.
Free
This value indicates the amount of free space currently available on the USB flash-
memory device plugged into your CP5 or CP50. The free memory is also displayed
as a percentage of the device's overall capacity.
Total
This value indicates the total memory capacity of the USB flash-memory device
plugged into your CP5 or CP50.