Yamaha piano Musical Instrument User Manual


 
CHAPTER 6: Other Settings
57
The digital piano has already been tuned to match the
acoustic piano (A3 = 440 Hz). However, you can re-tune
the digital piano in accordance with the pitch of the
acoustic piano by following the procedure below.
By connecting a microphone to the Disklavier and
singing along with the piano, you can enjoy a variety of
effects such as adding harmony to your voice and
changing the pitch of your voice. You may feel as if you
were singing in a bar lounge. It’s great fun to use this
function.
Tuning the Tone Generator
(MasterTune)
1
Tap on in the [Main] screen,
and then on .
2
Tap on / to tune the
Disklavier.
To cancel tuning, tap on .
3
Tap on to complete the
operation.
Applying an Effect to Your
Voice (Vocal Harmony)
1
Hook up a microphone (not supplied)
to the Media Center, and then turn on
the microphone.
2
Set the [MIC/LINE] switch to the [MIC]
position.
3
Turn the [INPUT VOLUME] knob to
adjust the input volume of the
microphone.
4
Adjust the [MIC] volume on PRC-100.
( pg. 25)
Microphone
(not supplied)
Media Center
[MIC/LINE]
switch
[INPUT VOLUME]
knob