Filter
Top Products
16
Playing the PSR-620
Function Description
Split Voice The split voice can be changed as required while the number
and name of the current split voice appear on the top line of
the display.
S.Volume Sets the volume of the split voice so you can create the opti-
mum blend with the right-hand voice. The volume range is
from “00” (no sound) to “127” (maximum split voice volume).
S.Octave Shifts the pitch of the split voice up or down one or two oc-
taves. “–1” is down one octave, “–2” is down two octaves; “+1”
and “+2” are up one and two octaves, respectively.
S.RevLvl Sets the reverb send level for the split voice. The reverb send
level determines the amount of signal sent to the reverb effect.
The range is from “00”(no effect) to “127” (maximum effect).
S.ChoLvl Sets the chorus send level for the split voice. The chorus send
level determines the amount of signal sent to the chorus ef-
fect. The range is from “00” (no effect) to “127” (maximum
effect).
S.Pan Positions the split voice in the stereo sound field. The pan
range is from “–7” to “+7”. “–7” is full left and “+7” is full right.
S.Split Sets the keyboard split point — i.e. the key that separates the
left- and right-hand voices (the split-point key is included in the
left-hand section of the keyboard). Simply press the key you
want to assign as the split point. The key number of the key
you press will appear to the left of “S.Split” on the top line of
the display. You can also use the [–/NO] and [+/YES] buttons,
the number buttons or the data dial to enter the split point key
number. The lowest key on the keyboard (C1) is key number
“36”, middle C (C3) is “60”, and the highest key (C6) is “96”.
The split point can be set at any key number from 00 through
127, allowing the split point to be set outside the range of the
PSR-620 keyboard for MIDI applications. The default split
point is 59 (B2).
CURSOR
–
/NO
+/YES
654
0
789
123
1
– –
**
*
• If the Voice Set function is ON
(page 79), the Split Voice param-
eters will change automatically
whenever a different keyboard
voice is selected.
• The selected Split Voice param-
eter can be reset to its default
value by simultaneously pressing
the [–/NO] and [+/YES] buttons.
• Negative ”S.Octave” and “S.Pan”
parameters can be entered by
pressing the number buttons
while holding the [-NO] button.
• Reverb and chorus return levels
can be changed via “RevRtnLv”
and “ChoRtnLv” in the DIGITAL
EFFECT function - see pages 25
and 27.
3
Exit .........................................................................................................................................................................................
Press the [VOICE] button or select a different function to exit from the
SPLIT VOICE function.