Filter
Top Products
54
Song Recording
■ Voice & Volume Rewrite
You can rewrite the last recorded voice change in any individual track
during playback by using the cursor buttons to select the voice number of
the target track (the voice number will flash), and then using the number
buttons, the [–/NO] and [+/YES] buttons or the data dial to select the de-
sired voice number. The data will actually be rewritten when the [PLAY/
STOP] button is pressed or the end of the song is reached or the next voice
change is encountered in the recorded data. The original voice number can
be recalled before it is actually rewritten by simultaneously pressing the
[–/NO] and [+/YES] buttons. Any other voice changes included in the re-
corded track data will take effect at the appropriate times.
■ Clearing the SONG TRACKS
All data in the ACCOMP, MELODY 1 and MELODY 2 tracks of the
user song (number 26) can be completely erased by first pressing the [MI-
NUS ONE] button while holding the [REC] button, and then pressing the
[+/YES] button in response to the “Clear?” confirmation prompt on the dis-
play (press [–/NO] if you decide not to erase the data).
The volume of each track can be rewritten during playback in the same
way. Use the cursor buttons to select the volume bar of the target track (the
volume bar will flash), and then use the [–/NO] and [+/YES] buttons or the
data dial to set the maximum volume of the track as required. The shorter
the bar, the lower the volume. The data will actually be rewritten when the
[PLAY/STOP] button is pressed or the end of the song is reached. The
original volume can be recalled before it is actually rewritten by simultane-
ously pressing the [–/NO] and [+/YES] buttons. The new volume data is
written only at the beginning of the track and affects the entire track.
• The dual voice will change
automatically when a melody
track voice is changed.
• Voice and volume data can
only be rewritten in songs you
have recorded yourself.
• Only songs you have recorded
yourself can be cleared.
• If a non-user song number is
selected when the song-clear
mode is engaged, user song
number 26 will automatically
be selected.
–
/NO
+
/YES
654
0
789
123
CURSOR
ACCOMP MELODY
2
MELODY
1
REC REC REC
101103
1
*
**
/
REC PLAY/STOP
REPEAT
PLAY
MINUS
ONE
SONG
Clear ?
126