Yamaha PSR-620 Musical Instrument User Manual


 
68
5
Press the [EXECUTE] Button ................................................................................
Press the [EXECUTE] button. The “SELECT DESTINATION”
indicator appears above the beat indicator in the display.
Using Floppy Disks
Yamaha
801
VOICE
STYLE
SONG
REGIST MEMORY
MULTI PAD
DUAL VOICE
SPLIT VOICE
HARM
/
ECHO
OVERALL
DIGITAL EFFECT
Loading From Disk
Never remove the disk or turn the
power OFF while the Saving display is
showing.
When a file is selected ******** will
appear to the right of the file number in
the display if the file contains no data.
If you select a file number that already
contains data and execute the save
operation, the PSR-620 will ask
Overwr ? for confirmation. If youre
sure to overwrite press the [+/YES]
button. The original data will be erased
and replaced by the new data!
If the disk becomes full when you try to
save ,DiskFull will appear on the
display and the save operation cannot
be done. Either delete unwanted data
from the disk to make more room, or
use a different disk.
Duplicate file names of the same file
type are not allowed. SameName will
be briefly displayed and the file which
name as same file type already exists
on the disk will automatically be se-
lected as the destination file. If you
execute the save operation for the file,
press the [EXECUTE] button (Press the
[QUIT] button if you want to cancel).
The PSR-620 will ask Overwr ? for
confirmation. If youre sure you want to
write of the existing data, press the [+/
YES] button.
If an error occurs while saving data to
the disk, WriteErr will appear on the
display. Try the operation again. If the
error persists there could be something
wrong with the floppy disk. Try a differ-
ent disk.
1
Select a Data Type .......................................................................................................................
Any of the four data types — style, song, registration memory and
multi pad — can be selected.
Press the [FUNCTION] button to the left of the display as many
times as necessary until the arrowhead in the display appears next to
“STYLE”, “SONG”, “REGIST MEMORY” or “MULTI PAD” in the
function list to the left of the display.
FUNCTION
SSax
801
VOICE
STYLE
SONG
REGIST MEMORY
MULTI PAD
DUAL VOICE
SPLIT VOICE
HARM
/
ECHO
OVERALL
DIGITAL EFFECT
6
Select a Destination File in the Disk .......................................................
Select the file number you want to save the data to via the [–/NO]
and [+/YES] button, the number buttons or the data dial.
7
Execute the Save Operation....................................................................................
Press the [EXECUTE] button again to execute the save operation.
“Saving” will appear on the display while the data is being saved and
the [EXECUTE] indicator will light. When the data has been saved,
the [EXECUTE] indicator will go out.
The save operation can be canceled by pressing the [QUIT] button
while the [EXECUTE] indicator is flashing.
Saving
101
JOB
SELECT
EXECUTE
QUIT
DISK