Filter
Top Products
35
Using Auto Accompaniment
6
Start the Accompaniment .........................................................................................................
There are several ways to start the accompaniment:
● Straight start:
Press the [START/STOP] button. The rhythm will begin playing imme-
diately without bass and chord accompaniment. The currently selected
MAIN [A] or [B] section will play.
• It is possible to select the MAIN
A or B section prior to a straight
start — refer to “8. Select the
MAIN A and B Sections as Re-
quired,” below.
● Start with an introduction followed by the MAIN A section:
Press the [INTRO] button so that its indicator lights, press the MAIN
[A] button (not necessary if its indicator is already flashing), then press
[START/STOP] button.
INTRO
ENDINGMAIN
AUTO FILL
START/STOP
SYNC-
START/STOP
AB
● Start with an introduction followed by the MAIN B section:
Press the [INTRO] button so that its indicator lights, press the MAIN
[B] button (not necessary if its indicator is already flashing), then press
[START/STOP] button.
INTRO
ENDINGMAIN
AUTO FILL
START/STOP
SYNC-
START/STOP
AB
• The [INTRO] button can be used
to select the INTRO section even
while the accompaniment is
playing.
INTRO
ENDINGMAIN
AUTO FILL
START/STOP
SYNC-
START/STOP
AB
• If you press the [SYNC-START/
STOP] button while the accom-
paniment is playing, the accom-
paniment will stop and the
synchro start mode will be en-
gaged.
• The accompaniment split point
can be changed via the
“AccSpPnt” function in the
OVERALL function group — see
page 41.
● Synchronized start:
Any of the above start types can be synchronized to the first note or
chord played on the left-hand section of the keyboard (i.e. keys to the left
of and including the split-point key — normally 54) by first pressing the
[SYNC-START/STOP] button.
INTRO
ENDINGMAIN
AUTO FILL
START/STOP
SYNC-
START/STOP
AB