Filter
Top Products
27
Digital Effects
3
Exit .........................................................................................................................................................................................
Press the [VOICE] button or select a different function to exit from the
DIGITAL EFFECT function.
1
Select the Chorus Return Level Function .................................................
Press the [FUNCTION] button to the left of the display as many times
as necessary until the arrowhead in the display appears next to “DIGITAL
EFFECT” in the function list to the left of the display, and use the cursor
[▲] and [▼] buttons to select the Chorus Return Level function.
• See page 88 for more details on
the Digital Effects.
• The chorus return level specified
here affects the entire setting.
The chorus send level, however,
can be independntly applied to
the voice selected via the VOICE
function, the split voice and the
dual voice via “ChoLevel” in the
OVERALL function group,
“S.ChoLvl” in the SPLIT VOICE
function and “D.ChoLvl” in the
DUAL VOICE function (see
pages 88, 16 and 19).
• The default chorus return level =
64 can be recalled instantly by
pressing both the [–/NO] and [+/
YES] buttons simultaneously.
2
Set the Chorus Return Level ...............................................................................................
Use the [–/NO] and [+/YES] buttons, the number buttons or the data dial
to set the desired chorus return level. The range is from “00” to “127”.
3
Exit .........................................................................................................................................................................................
Press the [VOICE] button or select a different function to exit from the
DIGITAL EFFECT function.
ChoRtnLv
164
Setting the Chorus Return Level
The chorus return level determines the amount of “wet” (effect) signal output to the amplifier.