Filter
Top Products
69
JOB
SELECT
EXECUTE
QUIT
DISK
Loading
803
VOICE
STYLE
SONG
REGIST MEMORY
MULTI PAD
Using Floppy Disks
• If the selected song can be
played via Quick Play fea-
ture, the LOAD job will not
automatically be selected
and the [EXECUTE] indica-
tor will not flash.
• Selecting a file on the disk
may not be possible, imme-
diately after the floppy disk
is inserted and while the
PSR-620 is reading the disk
data.
• If the PSR-620 RAM
memory becomes full or
there is something wrong
with the floppy disk or the
data on the disk is cor-
rupted when you try to load,
“Load Err” will appear on
the display.
2
Select a File.......................................................................................................................................................................
To select the file number you want to load, first press and hold the number [2]
button (below the disk icon on the panel) until the disk icon appears to the left of
the style, song, registration bank or multi pad kit name in the display, then enter
the number of the disk file you want to select via the number buttons in the nor-
mal way (2 digits). Disk files can also be selected by using the [–/NO] and [+/
YES] buttons or the data dial to go beyond the highest cartridge data numbers or
the lowest internal data numbers. If the selected file is loadable, the LOAD job is
automatically selected and the [EXECUTE] indicator will flash.
3
Execute the Load Operation ............................................................................................................
When the desired file has been specified, press the [EXECUTE] button.
If you have selected a STYLE, SONG or MULTI PAD data file, the file data
will automatically be loaded into the user style number “101”, user song number
“26” or user multi pad kit number “22“.
If you have selected a REGISTRATION data file, the “SELECT DESTINA-
TION” indicator will appear above the beat indicator in the display. Select a des-
tination registration memory bank (01 through 32) via the [–/NO] and [+/YES]
buttons, the number buttons or the data dial. When the destination registration
memory bank has been specified, press the [EXECUTE] button again.
JOB
SELECT
EXECUTE
QUIT
DISK
Bank1
801
VOICE
STYLE
SONG
REGIST MEMORY
MULTI PAD
BEAT
OTS
“Loading” will appear on the display while the data is being loaded. When
the data has been loaded the [EXECUTE] indicator will go out.
The load operation can be canceled by pressing the [QUIT] button while the
[EXECUTE] indicator is flashing.
• Never remove the disk or
turn the power OFF while
the “Loading” display is
showing.
• Please note that when you
load data from disk the
loaded data will replace any
current data of the same
type in the PSR-620
memory.
• You can also select the
LOAD job by pressing the
[JOB SELECT] button
before selecting the file you
want to load.
When you select the LOAD
job by pressing the [JOB
SELECT] button, the file
number “01” will appear on
the display. Select the file
you want to load by using
the [–/NO] and [+/YES]
buttons, the number buttons
or the data dial.
• If you select the file contain-
ing all the registration data
from 1 through 32 and
execute the load operation,
“AllBank?” will appear on
the display. If you’re sure to
load all the data, press the
[+/YES] button. All current
PSR-620 registration data
will be erased and replaced
by the new data.
654
789
123
Yamaha
801
VOICE
STYLE
SONG
REGIST MEMORY
1
*
**
MULTI PAD