Filter
Top Products
83
Overall Functions
■ Remote Channel ..........................................................................................................................................
Sets the MIDI channel on which data from a remote keyboard will be
received. Any of the standard MIDI channels — 1 through 16 — can be
specified. The remote keyboard must be set up to transmit on the specified
remote channel, and the keyboard’s MIDI OUT connector must be con-
nected to the PSR-620 MIDI IN connector via a standard MIDI cable. Refer
to the “MIDI Implementation Chart” section (page 100) for technical de-
tails. When set to OFF data is received on all 16 MIDI channels. The default
setting — OFF — can be recalled by pressing the [–/NO] and [+/YES]
buttons simultaneously.
• Remote Channel is automatically
turned OFF when a MIDI “GM
ON” message is received.
• The Remote channel setting is
retained in memory even when
the power switch is turned OFF,
as long as batteries are installed
or an AC adaptor is connected.
RemoteCh
oFF
■ Keyboard Out.....................................................................................................................................................
Determines whether keyboard data will or will not be transmitted via the
MIDI OUT connector. Keyboard data is transmitted when this function is
turned ON (default). When set to ON the keyboard data is transmitted on the
following MIDI channels:
Voice Channel
Right-hand main voice 1
Dual voice 11
Left-hand voice (Split voice)
2
KybdOut
oon
• Keyboard Out setting is retained
in memory even when the power
switch is turned OFF, as long as
batteries are installed or an AC
adaptor is connected.
■ Song Out.....................................................................................................................................................................
Determines whether song data (Melody track/s only) will or will not be
transmitted via the MIDI OUT connector. Song data is transmitted when
this function is turned ON. The default setting is OFF. When set to ON the
song data is transmitted on the following MIDI channels:
Track/voice Channel
Melody 1/main voice 13
Melody 1/dual voice 14
Melody 2/main voice 15
Melody 2/dual voice 16
SongOut
oFF
• Song Out setting is retained in
memory even when the power
switch is turned OFF, as long as
batteries are installed or an AC
adaptor is connected.
• Only the user song you recorded
can be transmitted.
• If you want to transmit all the
song data (including Accomp
track), set “Song Out” and “Ac-
companiment Out” to ON.