Filter
Top Products
94
Modifying the Drum Kits
2
Press the pad you want to modify after selecting the Pad Bank.
3
Adjust the balance sensitivity of the voice by rotating the Jog Dial or by
using the [ +1 ] and [ –1 ] buttons.
The range is from “+3” to “-3”. Depending on the setting of the Pad
Sensitivity (see page 98), this setting affects the balance of the voice, as
the pad is tapped harder.
The following diagram illustrates the effects of the different settings on
two-element voices.
Pressing the [ +1 ] and [ –1 ] buttons simultaneously resets the balance
sensitivity to “0”.
You can use the [ < ] and [ > ] cursor buttons to access the “SENS BAL”,
“DRUM KIT” and “PAD” settings.
NOTE
If the balance sensitivity setting is not applicable to the voice currently assigned to
the pad, the display shows “
--” to indicate that this parameter cannot be changed.
NOTE
If you have selected the Bass Pad Bank, the balance sensitivity setting applies to all
the pads.
Velocity
Volume
E1 (element1)
E2 (element2)
Velocity
Volume
E2
E1
Velocity
Volume
E2
E1
Velocity
Volume
E2
E1
Velocit
y
Volume
E2
E1
Velocit
y
Volume
E2
E1
Velocit
y
Volume
SENS=0 SENS=+1 SENS=+2 SENS=+3
SENS=-1 SENS=-2 SENS=-3
E2
E1
–1 +1