Filter
Top Products
47
Recording a User Pattern
3
Set the number of measures by using the [ > ] cursor button to change the
focus to the “MEASURE” prompt. Change the number of measures by
rotating the Jog Dial or using the [ +1 ] and [ –1 ] buttons.
The default length is “02” measures. The range is “01” measure to “16”
measures.
The RY20 has a built-in click sound which sounds on each beat of the
measure to serve as a rhythmic guide when you record in Real-time
Mode. You can change both the volume and the quantization of the
click sound.
1
Select the Click display page by pressing the [ PAGE+ ] button until the
display indicates “CLICK”.
2
Set the volume by rotating the Jog Dial or using the [ +1 ] and [ –1 ]
buttons.
The default volume level is “15”. The range is from “00” to “15”.
NOTE
The meter and number of measures in a pattern that contains data cannot be
changed. If you try to change these values, the message “
NOT EMPTY” will
momentarily appear on the display.
■ Adjusting the Click
NOTE
Pressing the
[ +1 ] and [ –1 ] buttons simultaneously resets the level to “00”.
PAGE – PAGE +
PATTERN
A CHASE
LEVEL
QUANTIZE
MAIN A
PAD BANK
OTHERS
HH
SD
BD