Filter
Top Products
118
MIDI Functions
The final MIDI function allows you to make back-ups of your RY20 by
dumping your pattern and song sequences and drum kit data to a
MIDI data filer such as the Yamaha MDF2.
1
Select the Bulk Dump display page by pressing the [PAGE+] or [PAGE–]
button.
2
Press the [ ENTER ] button to execute the request. The prompt “BULK SEND”
appears momentarily on the LCD followed by the prompt “END” when the
transmission has finished.
The RY20 can also read back data which you had previously saved to
an external MIDI storage device.
1
Turn the RY20 on by pressing the Power switch ON. Select Song Play
Mode or Pattern Play Mode. (By default, the RY20 powers up in Pattern
Play Mode.)
2
Send the bulk data from the external device.
For instructions about sending bulk data, please refer to the owner’s
manual for the external MIDI device.
■ Bulk Dump
■ Receiving Bulk Data
IMPORTANT
Do NOT select one of the sub-functions. The RY20 cannot receive MIDI Bulk Data
when it is set to one of its sub-functions.
PAGE – PAGE +
PATTERN MIDI
A CHASE
MAIN A
PAD BANK
OTHERS
HH
SD
BD
ENTER