Filter
Top Products
43
Recording a User Pattern
Press the appropriate drum pad, for example, the [ 6 - BD ] pad. The note
indicator for the event turns off.
Modifying the Level or Pad
You can change the level or pad of an event.
Use the [FORWARD] and [BACKWARD] buttons to locate the note event. Press
the [ < ] cursor button to change the focus to the “LEVEL” prompt.
Change the level by rotating the Jog Dial or by using the [ +1 ] and [ –1 ]
buttons.
Press the [ < ] cursor button again to change the focus to the “PAD” prompt.
Select another pad by rotating the Jog Dial or by using the [ +1 ] and [ –1 ]
buttons.
IMPORTANT
If you decide that you DO NOT want to delete a note from the pattern, you can
cancel this operation by simply releasing the
DELETE [CLEAR] button.
NOTE
An alternate method is to press and hold the
DELETE [CLEAR] button and then press
the
[ ENTER ] button while the position pointer is at the note you want to delete. In
this case, only the selected note will be deleted.
NOTE
The level value changes in increments of 4. For example, increasing the level “
087”
(shown above) by one step changes it to “
091”.
NOTE
As you change the pad number, notice that the Note indicator changes from track to
track. Also, see the note on page 42 for an alternative way of accessing a note event.
BD
6
INTRO
ENTER
PATTERN
A CHASE
MEAS
BEAT
CLOCK
LEVEL
QUANTIZE
PAD
MAIN A
PAD BANK
OTHERS
HH
SD
BD