Filter
Top Products
84
Modifying the Drum Kits
Select a Pad Bank
1
Press the [PAD BANK] button to switch the RY20 to Pad Bank Mode.
2
Select a Pad Bank from “A” to “E” by rotating the Jog Dial or by using the
[ +1 ] and [ –1 ] buttons.
You can also select the Bass Pad Bank. With the RY20 in Pad Bank Mode,
press the [PAGE+] button to access the Type display page. Change the type
from “DRUM” to “BASS” by rotating the Jog Dial or by using the [ +1 ] and
[ –1 ] buttons.
Press the [PAGE–] button to select the octave. The display shows the current
octave range. Select an octave range from “OCT-2” to “OCT+2” by rotating
the Jog Dial or by using the [ +1 ] and [ –1 ] buttons.
NOTE
From the initial display page of Pad Bank Mode, pressing the
[PAD BANK] button
will switch the RY20 back to the previously selected main mode, such as Pattern or
Song Play Mode or one of the recording modes.
NOTE
The selected Pad Bank indicator will be shown at the top of the display.
NOTE
When you switch the RY20 to “
BASS”, the Pad Bank indicator also changes.
IMPORTANT
If you change any of the following drum kit parameters on a drum pad, it is
changed for all the pads in the Bass Pad Bank.
PAD BANK
PATTERN
A CHASE
MAIN A
PAD BANK
OTHERS
HH
SD
BD
C CHASEPAD BANK
PAGE – PAGE +
BASS CHASEPAD BANK