Filter
Top Products
41
Recording a User Pattern
The Voice Name is the preset five character name for the voice assigned
to the current pad. If there is no voice recorded at this location, the display
shows “-----”.
The Section Indicator shows which pattern section you are working on.
The Pad Number Prompt shows which pad was recorded at the current
insert location. If there is no event recorded at this location, the display
shows “---”. You can select another pad for each recorded note at any
time during Pattern Record Mode.
Pattern Display
A more detailed view of the portion of the LCD panel that shows the
pattern data and status.
The Beat Indicator shows the quarter note divisions of the measure
and changes depending on the quantization.
The Position Indicator shows the possible note locations for the
current quantization level. The flashing position indicator shows the
current point in the pattern.
The Note Indicator shows that an instrument has been recorded on
one of the four tracks at this position.
Editing Buttons
The [FORWARD], [BACKWARD], and [ TOP ] buttons are designed to allow
you to move quickly through the pattern and efficiently edit your
pattern data.
Use the [FORWARD] button to move forward through your pattern. It stops
at each available note position. The maximum number of note positions to
a beat is 96. The number of available positions in a beat is determined by
the quantization setting. See page 44 for details about quantization.
Beat Indicator
Position Indicator (flashing indicates current point)
Note Indicator