Filter
Top Products
53
Other Pattern Functions
All three settings can be reset to their default values by pressing the [ +1 ]
and [ –1 ] buttons simultaneously.
4
Change the focus to the “LEVEL” prompt using the [ > ] cursor button.
5
Modify the value by rotating the Jog Dial or using the [ +1 ] and [ –1 ]
buttons.
The range is from “01” to “16” (full effect).
6
Change the focus to the “TIMING” prompt using the [ > ] cursor button.
7
Modify the value by rotating the Jog Dial or using the [ +1 ] and [ –1 ]
buttons.
The range is from “01” (slight delay) to “16” (extreme delay).
8
Change the focus to the “QUANTIZE” prompt using the [ > ] cursor button.
9
Modify the value by rotating the Jog Dial or using the [ +1 ] and [ –1 ]
buttons.
The repeat values are:
• eighth note.
• eighth note triplet.
• 16th note.
NOTE
If the “
LEVEL” setting is inactive, it is indicated with a value of “---” on the
display. Press the
[ > ] cursor button again to skip the inactive setting.
NOTE
If the “
TIMING” setting is inactive, it is indicated with a value of “---” on the
display.
NOTE
If the “
QUANTIZE” setting is inactive, the note icon at the right-center of the display
will be off.
3