Filter
Top Products
64
Recording a Song
6
Press the [FORWARD] button to select the next part to record.
7
Repeat the previous three steps to record the next part.
8
Press the [FORWARD] button again.
9
Repeat steps 7 and 8 until you have completed your song.
NOTE
The “
PART” number and “MEASURE” number prompts both get updated.
Part numbers that exceed “999” will be displayed without the fourth digit, for
example, part number 1001 will be displayed as “
001”.
A measure number that exceeds “999” will also be displayed without the fourth
digit. For example, measure number 1001 will be displayed as “
001.”.
HINT
Most songs consist of an intro, a number of measures of verse and chorus,
optionally a bridge, and an ending. The patterns of the RY20 follow this design.
For example, start your song off with an “
INTRO” section. Then select the “MAIN A”
section and record four parts. Record a single part of “
FILL AB” and follow it with
two parts of “
MAIN B”, a single part of “FILL BA” to make the transition back.
Record another four parts of “
MAIN A”, then select “ENDING”.
NOTE
Again the “
PART” number and “MEASURE” number prompts both get updated to
reflect the length of the latest pattern.
SONG
A CHASE
SONG
PART
MEASURE
PATTERN
MAIN A
PAD BANK
OTHERS
HH
SD
BD