Filter
Top Products
85
Modifying the Drum Kits
Assigning Voices
1
Press the [DRUM KIT] button to return to Drum Kit Mode.
2
Select the Assign display page by pressing the [PAGE+] or [PAGE–] buttons.
Notice that the voice assignment for the current drum pad is flashing.
3
Press the drum pad you want to modify. The pad number on the display
changes to the new drum pad. The voice assignment for that pad is also
shown on the display.
4
Select a voice from the 300 available to assign to the current pad by
rotating the Jog Dial or by using the [ +1 ] and [ –1 ] buttons.
5
Complete your drum kit by repeating the steps shown above with the
other drum pads. When you have finished assigning voices to the current
Pad Bank of your Drum Kit, select another Pad Bank and continue
assigning voices.
6
Press the [PAGE–] button to return to Drum Kit Mode.
HINT
You can also select a drum pad by changing the focus area.
Press the
[ > ] cursor button until the “PAD” indicator starts flashing, select another
pad with the Jog Dial or by using the
[ +1 ] and [ –1 ] buttons, then press the [ < ]
cursor button until the focus has returned to the voice assignment.
NOTE
You can assign any of the 300 voices of the RY20 to any drum pad. If you have
selected the Bass Pad Bank, the voice will act as a “pitched” voice. However, some of
the voices may not produce a distinguishable effect. You can only select ONE voice
for all the drum pads in the Bass Pad Bank.
DRUM KIT
PAGE – PAGE +
PATTERN DRUM KIT
A CHASE
DRUM KIT
PAD
MAIN A
PAD BANK
OTHERS
HH
SD
BD