Filter
Top Products
67
Recording a Song
Recording a song in real-time mode allows you to listen to the patterns
as you record them.
1
Select a song and start recording by pressing the [RECORD] button. The red
Record LED lights and the “PATTERN” indicator flashes.
2
Select the first section for your song by holding down the [SECTION] button
and pressing the Drum Pad button for the section you want to record.
Then select the first pattern by rotating the Jog Dial or by using the
[ +1 ] and [ –1 ] buttons.
3
Press the [ PLAY ] button to start real-time recording. The green Play LED
will flash in time with the current tempo setting, you will hear the click
sounds, and the RY20 will count down two measures.
When the countdown has completed, the RY20 will start playing the first
pattern. This pattern is recorded into the song.
■ Real-Time Record Mode
NOTE
You can adjust both the volume level and the quantization of the click sound. Refer
to page 72.
SONG
A CHASE
SONG
PART
MEASURE
PATTERN
MAIN A
PAD BANK
OTHERS
HH
SD
BD
SECTION
BD
6
INTRO
SONG
A CHASE
SONG
PART
MEASURE
PATTERN
MAIN A
PAD BANK
OTHERS
HH
SD
BD