Filter
Top Products
111
MIDI Functions
2
Switch from “INT” (internal clock, the default) to “MIDI” (external MIDI
controller) by rotating the Jog Dial or by using the [ +1 ] and [ –1 ] buttons.
If you are using the RY20 with an external sequencer, synthesizer, or
other MIDI device, set this function to “MIDI”. The external device must
be transmitting an appropriate MIDI clock signal. Note that the
“MIDI SYNC” indicator is lit up.
“INT” is the normal setting when the RY20 is being used by itself.
Set the transmission and reception channel for the drum instruments.
A separate channel is provided for the bass instrument.
1
Select the Drum Instruments display page by pressing the [PAGE+] or
[PAGE–] button. The current channel flashes beside the “CH” prompt.
IMPORTANT
When there is no external MIDI device, this function MUST be set to “
INT”
(internal clock).
■ Drum Instruments MIDI Channel
+
–1 +1
PATTERN MIDI
MIDI SYNC A CHASE
MAIN A
PAD BANK
OTHERS
HH
SD
BD
PAGE – PAGE +
PATTERN MIDI
A CHASE
MAIN A
PAD BANK
OTHERS
HH
SD
BD