Filter
Top Products
68
Recording a Song
4
Select the next pattern by rotating the Jog Dial or by using the [ +1 ] and
[ –1 ] buttons.
Alternatively, you can select another section. Press and hold the [SECTION]
button. Then press the drum pad button for the next section you want to
record.
The “NEXT” indicator lights up until the current pattern or section has
finished playing.
If the pattern or section you select is empty, the “EMPTY” indicator will
also light up.
5
Repeat step 4 until you have recorded all the patterns and sections you
want.
6
Press the [ STOP ] button to stop real-time recording. The green Play LED
stops flashing. However, the RY20 is still in record mode, allowing you to
continue adding to your song.
NOTE
If you selected the “
INTRO” section, it will be recorded and automatically followed
by “
MAIN A”.
If you select one of the two transition sections, “FILL AB” or “FILL BA”, they will
play (and be recorded) immediately. If the fill you select is “
FILL AB”, it will be
followed by “
MAIN B”. If the fill you select is “FILL BA”, it will be followed by
“
MAIN A”. The fills behave the same as during pattern play. See page 16 for further
details.
If you select the “
ENDING” section, the RY20 will play (and record) it and stop
real-time recording at the end of the section.
SONG
A CHASE
SONG
PART
MEASURE
NEXT
PATTERN
MAIN A
PAD BANK
OTHERS
HH
SD
BD
NEXT
EMPTY
PATTERN