Filter
Top Products
62
Recording a Song
The RY20 can record 50 original songs, each consisting of as many
patterns as you want, in its internal memory. The internal memory
saves your pattern and song data even if the power is shut off. There
are two song record modes: Step Record Mode and Real-time Record
Mode.
In this mode you select patterns one at a time to create your song.
1
Press the [ SONG ] button to put the unit in Song Mode. Notice that the
“SONG” indicator is flashing above the current Song Number.
2
Select a song from “00” to “49” to record into by rotating the Jog Dial or by
using the [ +1 ] and [ –1 ] buttons.
Song “50” is the demonstration song and cannot be edited. See page 12 for
demonstration song playback.
7
Recording a Song
■ Step Record Mode
WARNING
Be careful not to overwrite a song accidentally. If a song is empty, the “
PATTERN”
number is marked “
---” indicating that there is no pattern data recorded. If the
song position you want to use already has pattern data in it, you may want to clear
the existing data before you start to record your new song. See page 77.
SONG
SONG
A CHASE
SONG
PART
MEASURE
PATTERN
PAD BANK
OTHERS
HH
SD
BD
+
–1 +1