Filter
Top Products
97
Modifying the Drum Kits
You can set each drum pad to receive Note-Off information. Once
“NOTE” Driven is selected, its sound is cut immediately when you
release the pad or when the internal sequencer or an external MIDI
device sends a Note Off message.
1
Select the Note Driven display page by pressing the [PAGE+] or [PAGE–]
button. The display reads “DRIVEN” and the current status flashes.
2
Press the pad you want to modify after selecting the Pad Bank.
3
The Note Driven value of a drum pad is either “TRIG” or “NOTE”. Select a
value by rotating the Jog Dial or by using the [ +1 ] and [ –1 ] buttons.
When the Note-Off is received, the sound is cut off immediately.
You can use the [ < ] and [ > ] cursor buttons to access the “DRIVEN”,
“DRUM KIT” and “PAD” settings.
■ Note/Trigger Driven
NOTE
If the Driven setting is not applicable to the voice currently assigned to the pad, the
display shows “
-----” to indicate that this parameter cannot be changed. In this
case, the voice is fixed to the Note Driven setting. Refer to the Voice List shown on
page 124
PAGE – PAGE +
PATTERN DRUM KIT
A CHASE
DRUM KIT
PAD
MAIN A
PAD BANK
OTHERS
HH
SD
BD
NoteOn
NoteOff
Trigger Driven
Note Driven