Filter
Top Products
100
Modifying the Drum Kits
This function lets you copy the current drum kit to another user kit.
1
Place the unit in Drum Kit Mode by pressing the [DRUM KIT] button. Select
the drum kit to copy from by rotating the Jog Dial or by using the [ +1 ] and
[ –1 ] buttons.
The kit you just selected is the Source Kit.
2
Select the Copy display page by pressing the [PAGE+] or [PAGE–] buttons
until the display reads “COPY SURE?”. Notice that the “DRUM KIT” indicator
is flashing.
3
Select a drum kit from “20” to “39” to copy to by rotating the Jog Dial or by
using the [ +1 ] and [ –1 ] buttons.
The kit you just selected is the Destination Kit.
To initiate the copy, press the [ ENTER ] button. The “END” prompt will
momentarily appear on the display when the copy has finished.
■ Copy
NOTE
You can only copy to the user drum kits “
20” to “39”.
You CANNOT use the [ COPY ] button in this case.
If you want to exit this operation without performing the copy, press the [DRUM KIT]
button or select another display page with the
[PAGE+] or [PAGE–] button.
WARNING
When you press the
[ ENTER ] button, the copy operation will be performed. It is not
possible to recover data that you have lost.
DRUM KIT
PAGE – PAGE +
PATTERN DRUM KIT
A CHASE
DRUM KIT
MAIN A
PAD BANK
OTHERS
HH
SD
BD
ENTER