Filter
Top Products
13
Playing the Demo Song
3
Press the [ PLAY ] button to start the demonstration song. The green Play
LED will flash in time with the programmed tempo setting and the song
will begin playback.
Adjust the volume of the playback by rotating the VOLUME control.
4
Press the [ STOP ] button to stop the demonstration song. The green Play
LED stops flashing.
5
Press the [ PLAY ] button again to start the song from the point at which it
was stopped.
NOTE
As the song plays, the Voice Level Indicator for the active drum pad lights up on the
LCD. The display behaviour is similar to that of a VU meter.
NOTE
You cannot adjust the tempo of the demonstration song. You also cannot copy,
clear, or edit the demonstration song.
NOTE
The demonstration song sets the Repeat function. For further details see page 75.
The demonstration song repeats until you stop the RY20 by pressing the
[ STOP ]
button.
SONG
A CHASE
SONG
PART
MEASURE
PATTERN
PAD BANK
OTHERS
HH
SD
BD
Voice Level
Indicator
MIN MAX
VOLUME