Filter
Top Products
83
Modifying the Drum Kits
The first step in defining a drum kit is to assign voices to the drum
pads.
Select a User Drum Kit
1
Place the RY20 in Drum Kit Mode by pressing the [DRUM KIT] button. Note
that the “DRUM KIT” indicator at the top of the display is lit.
2
Select a user drum kit from “20” to “39” by rotating the Jog Dial or by
using the [ +1 ] and [ –1 ] buttons.
■ Assigning Voices to Each Pad
NOTE
From the initial display page of Drum Kit Mode, pressing the
[DRUM KIT] button
will switch the RY20 back to the previously selected main mode, such as Pattern or
Song Play Mode or one of the recording modes.
From the other display pages of Drum Kit Mode, pressing the
[DRUM KIT] button
will switch to the mode’s initial display page.
NOTE
Use one of the user locations from “
20” to “39” to create your own customized drum
kit. As shipped from the factory, the user drum kits contain the same data as the
drum kits “
00” to “19”.
DRUM KIT
PATTERN DRUM KIT
A CHASE
DRUM KIT
MAIN A
PAD BANK
OTHERS
HH
SD
BD
+
–1 +1