Filter
Top Products
87
Modifying the Drum Kits
Define the stereo pan for a drum pad.
1
Select the Pan display page by pressing the [PAGE+] or [PAGE–] buttons . The
display reads “PAN” and the current pan setting flashes.
2
Press the pad you want to modify after selecting the Pad Bank.
3
Set the pan for the selected pad by rotating the Jog Dial or by using the
[ +1 ] and [ –1 ] buttons.
The pan setting can be “OFF” or range from “-7” (extreme left) to “+7”
(extreme right). A setting of “+7” results in the output of the selected voice
coming from the right channel only, while a setting of “-7” pans fully left.
A setting of “0” is stereo centre.
All drum voices have a pre-assigned pan. Selecting “OFF” uses that value.
Pressing the [ +1 ] and [ –1 ] buttons simultaneously resets the pan to the
“OFF” setting.
You can use the [ < ] and [ > ] cursor buttons to access the “PAN”,
“DRUM KIT” and “PAD” settings.
■ Stereo Pan
NOTE
Even though a voice is panned fully to one channel, you may still hear that voice in
the other channel due to the effects processing performed by the built-in DSP.
NOTE
Each pad in your drum kit can be set with a different pan setting unless you have
selected the Bass Pad Bank. The bass or pitched voice is assigned one pan for the
entire bank.
PAGE – PAGE +
PATTERN DRUM KIT
A CHASE
DRUM KIT
PAD
MAIN A
PAD BANK
OTHERS
HH
SD
BD
–1 +1