Filter
Top Products
VL Version 2
28
EDIT/COM/MISC/CONTINUOUS SLIDER
●
Slider Assign Parameters
A range of new parameters can be assigned to the continuous sliders.
Feature Reference pages: VL1
➯
43; VL1-m
➯
43; VL7
➯
40
EDIT/COM/MISC/PART SETTING
The parameters in this page become active when the “Key Mode” parameter is set
to “Part”. “Keymode is not Part” appears in this page when the key mode is
not set to “Part”.
●
Split
¯ off, Static, Dynamic
When “Split” is “off”, separate MIDI receive channels can be set for elements 1 and
2 allowing them to be controlled on different channels from an external MIDI controller.
In this case note data received on the receive channel set in the UTILITY/SYSTEM page
is ignored. Program change, continuous slider data (i.e. control change numbers 16 and
17; quick edit in the VL1-m), effect control data, polyphony control data, and main
volume data are received on the main receive channel set in the UTILITY/SYSTEM
page.When active, the element 1 and element 2 MIDI receive channels appear on line 5
of the PLAY mode display.