Filter
Top Products
This section presents some experiments that will help you to become
familiar with how the VL controllers and other features work.
5: Experiments
Preparation
10.Press [. The LOAD FROM DISK menu will
appear.
11.Use the cursor buttons to select “1: All”.
12.Press [ and a list of the files on the disk will
appear.
13.Use the cursor buttons to select “EXAMPLE :ALL”.
14.Press [. The “Are You Sure?” confirmation prompt
will appear (unless the confirmation message parameter is
off).
15.Press - to load the EXAMPLE file. “Completed!”
will appear on the display when the data has been loaded.
16.Press ].
17.Press P.
The example voice file we’ll use for the following
experiments should now be properly loaded. Voices A01
through A05 are the ones we’ll use on the VL1 Ver.2 and VL7
Ver.2. On the VL1-m Ver.2 we’ll use A01 through A06. These
voices have been specifically created to facilitate understanding
of the way the VL system works. All other voices are un-
changed.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
The floppy disks supplied with the original VL
models include a file named “EXAMPLE :ALL”
which contains a number of voices programmed specifically
for use in the experiments described in this section. Before
going on to the experiments themselves, load the voices and, if
necessary, turn memory protection off as described below.
1. Press U.
2. Press ¡ (Sys) to go to the utility system menu.
3. Use the cursor buttons to select “Miscellaneous”.
4. Press [. The system miscellaneous parameter page
will appear.
5. Use the cursor buttons to select the “Memory Protect”
parameter.
6. Press = to turn the “Memory Protect” parameter
“off”.
7. Insert the supplied floppy disk into the disk drive.
8. Press £ (Disk) to go to the utility disk menu.
9. Use the cursor buttons to select “2: Load From Disk”.
58