Filter
Top Products
VL Version 2
37
4. New Features & Parameters
●
Freq.
¯ 0.057 … 40.0 Hz.
Sets the speed of modulation and therefore the rate of celeste effect variation.
●
Depth
¯ 0 … 100%.
Sets the depth of modulation. Higher values produce deeper modulation and there-
fore a more pronounced celeste effect.
●
Delay
¯ 0.33 … 32.87 ms.
Sets the celeste delay time (the celeste effect is basically produced by modulating
the delay time of one signal in relation to another). The higher the value the more pro-
nounced the celeste effect.
●
FB Gain
¯ -100 … 100 %.
Determines the amount of effect-sound feedback returned to the input of the celeste
stage. Higher negative or positve values produce a more pronounced effect.
●
Lo-Fi
¯ off, 1 … 12.
This parameter can be used to give the celeste effect a more analog feel. Higher
values produce a smoother effect in the high-frequency range.
●
Wet/Dry Balance
¯ 0 … 100 %.
Sets the balance between the direct (“dry”) and effect (“wet”) sound. Higher values
produce a greater proportion of effect sound in relation to direct sound.
EDIT