Filter
Top Products
446416M Front PAnel
about the channel‑to‑Slot relationships.
The • VDC inc/dec buttons can be used to get info about
Virtual Data Cable port assignments.
Query Functions (Get Info)
When a Pro64 module is edit locked, its front‑panel channel buttons can be
used to get Slot info. Pressing any channel button will display the selected
channel’s A‑Net Slot number in the A‑Net Slot display.
For example, if an input module is set to the A‑Net Slot range starting at 17,
pressing channel button 2 will display “18,” channel button 3 will display “19,”
etc.
6 41 6
m
A-NET SLOT
Edit Lock
Managed
Edit
CONTROL
MASTER
ENTER
CANCEL
Gain (dB)
Port A
Port B
Auto
A-NET
TRANSMIT
Manual
VDC SLOT
RS-232
MIDI In
MIDI Out
GPIO In
GPIO Out
ASSIGN
PORT
CLOCK
MASTER
CONTROL
Sample Rate
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Link
Link Link
Link
Link Link
Link
Link
Mute
Edit
Mute
Edit
Mute
+48VPhase Low CutSAVE RECALL Pad
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute Mute Mute
Mute
Edit Edit Edit Edit
Mute
Edit
Mute
Edit
Mute
FUNCTION
Group 4
Group 3
Group 2
On an input module set to the A-Net Slot range starting at 17, pressing the
Channel 2 button displays A-Net Slot 18 when the module is edit locked.
Pressing the Channel 3 button will display “19,” pressing the Channel 4
button will display “20,” etc.
Channel activation status is not affected by the use of the query function. It
is used for information only.
To Exit the query function, press Ed i t lo C k followed by En t E r to return to
normal operation.