Filter
Top Products
80Mcs FeAtures
Only Slot numbers from 1‑64 (at 44.1/48kHz), 1‑32 (at 88.2/96kHz), or 1‑16 (at
176.4/192kHz) are valid. Entering any invalid number (for example, an out‑of‑
range Slot) will return the display to the last legal Slot number displayed.
No Control Indicator
The No Control indicator dot in the lower right corner of the A‑Net Slot
display will light to indicate that the currently selected Slot cannot be edited.
Active input channels assigned to Slots in the Pro64 network that are not
coming from mic input modules can be monitored but cannot be controlled
or edited.
No
Control
The No Control indicator dot will be displayed whenever the selected Slot
cannot be edited from the MCS.
The No Control indicator dot will also light when a selected mic preamp
Slot is not in the same Control Group that is set on the RCI you are currently
connected to.
Save and Recall Buttons
The Save and Recall buttons on the MCS are used to store or recall one of the
sixteen available presets in controllable mic input modules. Remember that
the Presets are saved in the 6416m modules and not in the RCI or MCS.
No
Control
Save/Recall and Enter/Cancel buttons are below the Slot display.
To use the Save and Recall functions from the MCS, any 6416m Mic Input
Modules that you want to control need to be set to the same Control Group
that the RCI Remote Control Interface is set to.
When using the Save and Recall functions from the MCS, all 6416m Mic Input