Filter
Top Products
64virtuAl dAtA cAbles
VIRTUAL DATA CABLE PORTS
AC POWER
FUSE: VAC-FAL
IN
OUT
RS-
RESERVED
CONTROL MASTER
–8
IN OUT
ON
RS-
AMP
PIN = GND
VDC
BACKUP POWER
GPIO INPUT
UP= ISOLATED
DN=TTL
– –
Pin 2 Hot
Mic Input Module
B
A
Here, the 6416m is set for a 57,600 baud RS-232 transfer with 8 data bits, no
parity, and stop bit set to 2. (Black indicates the switch handle.)
The following table lists the DIP switch settings for the available RS‑232 baud
rates.
Switch
Baud Rate 1 2 3 4
1200 off off off off
2400 off off off on
4800 off off on off
7200 off off on on
9600 off on off off
14400 off on off on
19200 off on on off
28800 off on on on
38400 on off off off
57600 on off off on
31250 (MIDI) on off on off
Control Master DIP Switch
In the RS‑232 DIP switch block on the 6416m, switch #10 is used to set the
module as the network’s Control Master. Only one module can be designated
as Control Master in a Pro64 network.
VIRTUAL DATA CABLE PORTS
AC POWER
FUSE: VAC-FAL
IN
OUT
RS-
RESERVED
CONTROL MASTER
–8
IN OUT
ON
RS-
AMP
PIN = GND
VDC
BACKUP POWER
GPIO INPUT
UP= ISOLATED
DN=TTL
– –
Pin 2 Hot
Mic Input Module
B
A
When switch #10 is in the up position, the 6416m becomes the network’s
Control Master. (Black indicates the switch handle.)