Filter
Top Products
28
Aviom A-16R and A-16CS User Guide
• The RECALL and GROUP buttons will both flash when
held down simultaneously. This is the
Save Mode, as
indicated by the connecting graphic above the two
buttons on the front panel.
• When a Preset is saved, all sixteen Channel buttons
will flash briefly to confirm the Preset save operation.
• The
SOLO button has one LED. It will light when
pressed, indicating that the selected Channel or Group
is now being auditioned with all other Channels being
muted.
• The
MUTE button has no LED in it. Pressing the MUTE
button with a Channel selected will silence the Channel
and cause the Channel’s lower ( yellow) LED to light.
There is also one special button combination, the R
ECALL button
followed by the
MUTE button. When used together this combination
serves a twofold function:
• If there is a sudden change in the audio volume coming
through the monitor system, this button combination
silences all audio channels instantly.
• When starting from scratch to create a new mix, use
this function to set all sixteen channels to
zero volume
and all channel pans to the center setting.
A-16R
A-Net Mixer
Phones
1 2
3 4
5 6
7 8
9 10
11 12
13 14
15 16
Mix In
Remote
Midi Off
Local
Midi On
Note: The text on the right side of the label strip reads
“In Recall Mode All Volumes Zero” as a reminder
that this function is always available.
Making Changes to Channel Settings
The A-16R Personal Mixer has one set of common controls used
for mix editing. A simple convention is used: to make a change to a
Channel, first select it. Then the Channel is available for editing.
On the Personal Mixer you can change:
• Volume