Filter
Top Products
30
Aviom A-16R and A-16CS User Guide
Volume and Pan Control
When you change the volume of a Channel on the Personal Mixer,
the LEDs in the Volume section of the interface will indicate the level
in real time. There are twelve LEDs in the Volume indicator, each
capable of displaying two levels, for a total of twenty-four visible
lighted steps.
When a Channel is selected, the current volume is instantly indicated
on the LEDs. When no LEDs are lit, Channel volume is at its
minimum setting.
A-16R
A-Net Mixer
Phones
1 2
3 4
5 6
7 8
9 10
11 12
13 14
15 16
Mix In
Remote
Midi Off
Local
Midi On
Pan and Volume Controls
To make changes to a Channel:
• Select a Channel by pressing its numbered button—the
upper LED will light.
• Rotate the V
OLUME knob to the right to increase the
volume; rotate to the left to lower the volume. The
Volume LEDs indicate the current level.
• While the Channel is still selected, you can also change
the Pan setting. Rotate the PAN knob left or right to
change the position of the Channel in the stereo field.
Pan LEDs
The Pan indicator is made up of five LEDs. The center LED is green.
The LEDs on either side of center are red. As you turn the PAN knob,
the LEDs will light in various combinations to provide the maximum
number of pan position indicators with the fewest number of LED
lamps. At either end of the display only one LED will be lit to indicate
that the Channel is panned full left or right.
When using linked channels (stereo inputs), the LEDs light in different