Edirol FA-101 Musical Instrument User Manual


 
18
Installing the driver (Windows)
8
From the Windows
start
menu, choose
“Run...”
The
“Run”
dialog box will appear.
9
Input the name into the dialog box as shown, and click
[OK]
.
fig.win-run
(Drive name): \Driver\XP_ENG\setup.exe
* The drive name is “D:” in the example shown here, but this may be different on your system.
Specify the drive name for your CD-ROM drive.
10
The
EDIROL FA-101 Driver Setup
dialog box appears.
Click
[Install]
.
11
A dialog box entitled
“Setup is now ready to install the drivers”
appears.
Use a FireWire (IEEE 1394) cable to connect the FA-101 to your computer.
1.
With the power switch turned off, connect the AC adaptor to the FA-101.
2.
Plug the AC adaptor’s power cord into an AC outlet.
3.
Use a FireWire (IEEE 1394) cable to connect the FA-101 to your computer.
12
Turn on the power switch
of the FA-101.
The
“Found New Hardware”
message appears near the taskbar. Please wait.
13
A dialog box entitled
Welcome to the Found New Hardware Wizard
appears. Make
sure that the box indicates
“EDIROL FA-101 Sub 1,”
choose
“Install the software
automatically (Recommended),”
and click
[Next]
.
Checking the name of
your drive.
From the start menu,
choose My Computer. In
the window that appears,
verify the name of the CD-
ROM drive into which you
inserted the CD-ROM in
step 7.
The (D:) or (E:) displayed
b
y the CD-ROM drive icon
is the drive name.
If you want to install the
driver into a different hard
disk, click [Browse] and
specify the desired
location.
fig.caution.eps
If the setting in the Driver Signing
Options dialog box is not set to
“Ignore,” a dialog box like the
following will appear.
Click [Continue Anyway] to continue
driver installation.
Once the connections have
b
een completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong
order, you risk causing
malfunction and/or
damage to speakers and
other devices.
This unit is equipped with
a protection circuit. A brief
interval (a few seconds)
after power up is required
b
efore the unit will operate
normally.
FA-101_e.book 18 ページ 2005年11月24日 木曜日 午後1時25分