Filter
Top Products
34
Software settings
Here is an example using Logic Platinum 6.
1.
Power up the FA-101, and then start up Logic.
2.
From the
Logic Platinum
menu, choose
Preferences - Audio Hardware & Driver
to open the
Preferences
dialog box.
3.
In the
Core Audio
section, set
Driver
to
EDIROL FA-101
.
4.
Select (add a check mark to) the checkbox located at the left of
Core Audio
.
5.
If a dialog box like the following appears, click
[Try (Re)Launch]
.
fig.logic.eps
6.
Click
[OK]
to close the dialog box.
fig.logic.eps
Logic
3
6
4
I/O Buffer Size
[Example setting for use at 96 kHz]
As a general guideline, use the following
setting:
PowerPC G4 1 GHz or higher 512
PowerPC G4 1 GHz or lower 1024
Larger Disk Buffer
Check this box if a warning dialog box
such as “Disk is too slow” is displayed.
FA-101_e.book 34 ページ ２００５年１１月２４日 木曜日 午後１時２５分