Filter
Top Products
35
Software settings
There is no FA-101 Driver Settings dialog box on Macintosh.
Make settings from within your software.
You can adjust the audio latency by changing the FA-101 driver settings.
Decreasing the buffer size will shorten the latency.
Increasing the buffer size may eliminate problems such as clicks or pops in the sound.
*
Latency
is the time delay from when the software plays back audio data until sound is actual heard from an audio device
such as the FA-101.
Here's how to adjust the buffer size.
1.
Close any software that is using the FA-101.
2.
From the Windows
start
menu, choose
Control Panel
.
3.
Click
“Switch to Classic View”
to select the
Classic view
.
Depending on your system, the Classic view may already be selected. If so, proceed to the next step.
fig.control-icon.eps
4.
In the
Control Panel
, double-click the
EDIROL FA-101
icon.
The
EDIROL FA-101 Driver settings
dialog box will appear.
fig.control.eps
5.
Set
WDM
and
ASIO
to
Normal
.
6.
Move the Buffer Size slider to the far left (Min).
If clicks or pops occur with the current setting, move the slider one step
toward the right from its current value.
7.
Click
[OK]
to close the dialog box.
8.
Turn the power of the FA-101 off, then on again.
At this time, be sure to close all software before you turn the FA-101's
power off.
* If you power of the FA-101 off while using your software, it may not operate
correctly.
9.
Re-start the software that is using the FA-101.
If your software includes a function for testing audio devices, execute the
test function after re-starting the software.
* Settings are not applied until you restart your software.
10.
Play back audio data on your software.
If you hear clicks or pops, close the software, and repeat steps 4–10 until you no longer hear clicks or pops.
This completes the basic settings.
fig.control2.eps
If you are using WDM or ASIO compatible software, and you still
experience clicks or pops in the sound even after making the above
setting, or if you want to make the latency even shorter, you can change
the settings from the pulldown menu.
FA-101 Driver Settings dialog box (Windows)
FA-101_e.book 35 ページ ２００５年１１月２４日 木曜日 午後１時２５分